Danfoss Drives
Advanced Motor Control - NZ's Largest Stockist of Danfoss Drives with Technical Support

Danfoss FC202

VLT® AQUA Variable Speed Drive

Danfoss FC202 Stock available in NZ

The VLT® AQUA Drive FC202 is designed to provide the highest level of performance of AC-motor-driven applications. Featuring a wide range of powerful standard features, which can be expanded with performance-improving options, the drive is equally suited to both new and retrofit projects. The new generation Danfoss FC202 can realistically offer first-year cost savings of between 10–30% compared to traditional drive solutions. Its high lifetime availability and low energy consumption and maintenance costs provide you with the lowest cost of ownership.

The quick and user-friendly setup reduces installation time ensuring a fast route to maximum energy efficiency and motor control. By collecting the most important parameters in one place, the risk of incorrect configuration is reduced significantly.

See on the Danfoss Site

Water and Wastewater Applications

The considerable daily load variation in water or wastewater treatment plants makes it economically feasible to introduce motor control on rotating equipment such as pumps and blowers.

Operating the Danfoss FC202 in a closed loop mode with a pressure transducer causes the pump speed to vary in a manner to operate at a constant pressure, independent of flow requirements. Applications include Rural Irrigation and Town Water Supplies.

Flow transducer feedback can be used with the Danfoss FC202 for flow limited operation.

The Danfoss FC202 VFD is an ideal replacement for the older Danfoss VLT6000 drives and Danfoss VLT8000 drives.


Refrigeration Applications

Refrigeration Centrifugal and Screw Compressors can be used with the Danfoss FC202 drive to regulate the compressor speed and optimise energy efficiencies.

Unrestricted Circulating fans can be controlled by Danfoss FC202 drives to maximise efficiencies.

The Danfoss FC202 VFD is an ideal replacement for the older VLT6000 drives and VLT8000 drives.


Industrial Variable Torque Applications

The VLT® AQUA Drive the perfect match for Industrial Variable Torque applications including fans, pumps, blowers, and compressors. It is a direct replacement for the FC 322 and VLT6000. Available in a wide range of industrial enclosures from protected chassis to IP 66 (NEMA 4 X Indoor).

For High Torque and Heavy Duty applications, use the Danfoss FC302 Automation Drive>.


Supply voltages and power range

  - 1 x 200V - 240V        1.1kW - 22kW
  - 1 x 380V - 480V        7.5kW – 37kW

  - 3 x 200V - 240V        0.25kW - 45kW
  - 3 x 380V - 480V        0.37kW – 1MW
  - 3 x 525V - 600V        0.75kW - 90kW
  - 3 x 525V - 690V        45kW – 1.4MW

  - 3 x 380V - 480V        132kW – 710kW    (Low harmonic drive)
  - 3 x 380V - 690V        250kW – 1200kW    (12-pulse drive)


Common applications

  - Centrifugal pumps and blowers
  - Centrifugal Compressors
  - Positive displacement blowers
  - Variable Torque Applications


Features and benefits
- Assets are protected thanks to specially designed software that prevents, for example, water hammering.
- Energy efficiency is maximized as a result of the drives control algorithms and design which focus on reducing heat loss.
- High energy savings related to air conditioning are ensured due to the unique back-channel-cooling concept that transfers 90% of heat away from the room.
- Electromagnetic interference and harmonic distortion are reduced thanks to the built-in, scalable RFI filter and integrated DC link chokes.
- Perfect system integration and adaptation to the application are possible due to freely programmable warnings and alerts.
- 3–8% energy savings are achieved as a result of Automatic Energy Optimization.

Available Danfoss FC202 stock in New Zealand
Updated: December 21, 2023
Terms and Conditions  |  Privacy Policy
© 2020 Advanced Motor Control Ltd.
+64 3 341 1285